Conditions for Running the DTC

P0685

• The ignition is ON, or the engine is running.
• The ignition voltage is between 11-32 V.
• The DTC runs continuously once the above conditions are met.

P0689

• DTC P0685 is not set.
• Powertrain relay is commanded ON.
• The run/crank voltage is greater than 11 V.
• The DTC runs continuously once the above conditions are met.

P0690

• DTC P0685 is not set.
• Powertrain relay is commanded ON.
• The ignition is ON.
• The DTC runs continuously when the above conditions are met.

P1682

• The engine controls ignition relay is commanded ON.
• The run/crank voltage is greater than 5.5 V
• The DTC runs continuously when the above conditions are met.