Conditions for Running the DTC

WARNING: This page is about a different variant/trim than selected.

DTCs P00C8, P00C9, P010C, P010D, P16A0, P16A1, P16A2, P160E, P160D, P16F3, P0068, P0101, P0102, P0103, P0111, P0112, P0113, P0114 P0116, P0117, P0118, P0122, P0123, P0125, P0128, P0191, P0192, P0193, P0222, P0223, P0443, P0449, P0452, P0453, P0454, P0502, P0503, P0601, P0604, P0606, P0722, P0723, P1104, P1682, P2100, P2101, P2102, P2103, P2135, P2176, P2227, P2228, P2229, P2230 are not set.
The ignition voltage is between 11-32 V.
The engine OFF time is greater than 8 h,
The barometric pressure (BARO) is greater than 70 kPa.
The fuel level is between 10-90 %.
The startup engine coolant temperature (ECT) is less than 35°C (95°F).
The startup intake air temperature (IAT) is between 4-30°C (39-86°F).
DTC P0496 runs once per cold start, for up to 17 min, when the above conditions are met.