Component Testing
WARNING: This page is about a different variant/trim than selected.
Static Test
- Ignition OFF, disconnect the harness connector at the Q13 Evaporative Emission Vent Solenoid Valve.
- Test for 10-30 Ω between the control terminal 1 and the B+ voltage terminal 2.
- If not between 10.0-30.0 Ω
Replace the Q13 Evaporative Emission Vent Solenoid Valve.
- If between 10.0-30.0 Ω
- If not between 10.0-30.0 Ω
- All OK.