Conditions for Setting the DTC
WARNING: This page is about a different variant/trim than selected.
P0340 and P0365 - Engine Cranking Camshaft Test
The ECM does not receive camshaft pulses for greater than 5.5 s.
or
The ECM does not receive camshaft pulses at engine start for greater than 4 s.
P0340 and P0365 - Time Based Camshaft Test
The ECM does not receive 4 camshaft pulses for greater than 3 s.
P0340 and P0365 - Fast Event Based Camshaft Test
The ECM does not receive camshaft pulses during the first 12 medium resolution events.
P0340 and P0365 - Slow Event Based Camshaft Test
The ECM does not receive any camshaft pulse during 100 engine cycles.