Circuit/System Verification
WARNING: This page is about a different variant/trim than selected.
- Verify that no other DTCs are set.
- If a DTC is set, refer to Diagnostic Trouble Code (DTC) List - Vehicle .
- Engine idling, verify there is no abnormal engine noise.
- If there is abnormal engine noise, refer to Symptoms - Engine Mechanical .
- Observe the scan tool Misfire Current Counter parameters. The Misfire Counters should not be incrementing.
- If the vehicle passes the circuit/system verification test, operate the vehicle within the conditions for running the DTC. You may also operate the vehicle within the conditions that are captured in the freeze frame/failure records lists.