LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2012 >> Cruze Eco, Automatic Trans >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 3 (Engine Controls/Fuel - 1.8L - Repair Instructions) >> Repair Instructions >> Fuel Level Sensor Replacement >> Removal Procedure

Removal Procedure

WARNING: This page is about a different variant/trim than selected.
WARNING:

Refer to Gasoline/Gasoline Vapors Warning .

  1. Remove and disassemble fuel tank. Refer to Fuel Tank Fuel Pump Module Replacement .
    2. Fig 1: Fuel Sender Assembly
    GM2189327Courtesy of GENERAL MOTORS COMPANY
  2. Disconnect the fuel sender assembly wiring harness plug (1).
  3. Unclip the 2 fuel sender retainer pins.
  4. Remove the fuel sender assembly (2).
scientia non olet · About LEMON Manuals