LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2012 >> Cruze Eco, Automatic Trans >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 3 (Engine Controls/Fuel - 1.8L - Repair Instructions) >> Repair Instructions >> Air Cleaner Element Replacement >> Installation Procedure

Installation Procedure

WARNING: This page is about a different variant/trim than selected.
    Fig 1: Air Cleaner Element, Air Cleaner Housing, Air Cleaner Housing Cover And Bolts
    GM2027590Courtesy of GENERAL MOTORS COMPANY
  1. Install the air cleaner element (2) into the air cleaner housing (1).
  2. Install the air cleaner housing cover (4).
  3. CAUTION:

    Refer to Fastener Caution .

  4. Install the 6 air cleaner housing cover bolts (3) and tighten to 5 N.m (44 lb in).
  5. Install the air cleaner outlet duct. Refer to Air Cleaner Outlet Duct Replacement .
  6. Fig 2: Intake Air Sensor Wiring Harness Plug
    GM2027620Courtesy of GENERAL MOTORS COMPANY
  7. Connect the intake air sensor wiring harness plug (1).
  8. Close the hood.