LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2012 >> Cruze Eco, Automatic Trans >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 3 (Engine Controls/Fuel - 1.8L - Repair Instructions) >> Repair Instructions >> Air Cleaner Assembly Replacement >> Removal Procedure

Removal Procedure

WARNING: This page is about a different variant/trim than selected.
  1. Open the hood.
    2. Fig 1: Intake Air Sensor Wiring Harness Plug
    GM2027620Courtesy of GENERAL MOTORS COMPANY
  2. Disconnect the intake air temperature sensor wiring harness plug (1).
  3. Remove the air cleaner outlet duct. Refer to Air Cleaner Outlet Duct Replacement .
    4. Fig 2: Air Cleaner Assembly
    GM2027600Courtesy of GENERAL MOTORS COMPANY
  4. Remove the air cleaner assembly (1).
    • Unclip the air cleaner inlet duct
    • Unclip the drain hose, if equipped
scientia non olet · About LEMON Manuals