Installation Procedure

WARNING: This page is about a different variant/trim than selected.

Fig 1: Transmission Rear Mount, Nuts And Bolts

GM2191543

Courtesy of GENERAL MOTORS COMPANY

Install the transmission rear mount (2).
Install the 2 transmission rear mount bolts (1).

CAUTION:

Refer to Fastener Caution .

Install the 2 transmission rear mount nuts (3) and tighten to 110 N.m (82 lb ft).
Install the transmission rear mount bracket. Refer to Transmission Mount Bracket Replacement - Rear .
If equipped with Electronic Power Steering, install the steering gear. Refer to Steering Gear Replacement .