LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2012 >> Cruze Eco, Automatic Trans >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 2 (Manual Transmission - M32) >> Repair Instructions - On Vehicle >> Selector and Shift Lever Cable Bracket Replacement >> Removal Procedure

Removal Procedure

WARNING: This page is about a different variant/trim than selected.
  1. Remove battery tray. Refer to Battery Tray Replacement .
    2. Fig 1: Selector Lever Cable, Bracket And Transmission Control Housing
    GM2191413Courtesy of GENERAL MOTORS COMPANY
  2. Using a suitable pry tool, carefully remove shift lever and selector lever cable (2) from transmission control housing (3) using.
  3. Remove shift lever and selector lever cable from shift lever and selector lever cable bracket (1).
    4. Fig 2: Selector Lever Cable Bracket And Bolts
    GM2191517Courtesy of GENERAL MOTORS COMPANY
  4. Remove 2 shift lever and selector lever cable bracket bolts (1).
  5. Remove shift lever and selector lever cable bracket (2).
scientia non olet · About LEMON Manuals