LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2012 >> Cruze Eco, Automatic Trans >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 2 (Manual Transmission - M32) >> Repair Instructions - On Vehicle >> Manual Transmission Shift Lever and Selector Lever Cable Replacement >> Installation Procedure

Installation Procedure

WARNING: This page is about a different variant/trim than selected.
    Fig 1: Selector Lever Cable
    GM2191408Courtesy of GENERAL MOTORS COMPANY
  1. Install shift lever and selector lever cable from inside the engine compartment.
  2. Install shift lever and selector lever cable (1) to bulkhead.
    3. Fig 2: Selector Lever Cable, Bracket And Transmission Control Housing
    GM2191413Courtesy of GENERAL MOTORS COMPANY
  3. Install shift lever and selector lever cable (2) to shift lever and selector lever cable bracket (1).
  4. Install shift lever and selector lever cable to transmission control housing (3).
  5. Install transmission control. Refer to Transmission Control Replacement .
  6. Install battery tray. Refer to Battery Tray Replacement .
scientia non olet · About LEMON Manuals