LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2012 >> Cruze Eco, Automatic Trans >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 1 (Engine Mechanical - 1.8L (LUW)) >> Repair Instructions - On Vehicle >> Timing Belt Rear Cover Replacement >> Removal Procedure

Removal Procedure

WARNING: This page is about a different variant/trim than selected.
  1. Remove the camshaft position actuator adjuster. Refer to Camshaft Position Actuator Adjuster Replacement .
  2. Remove the timing belt tensioner. Refer to Timing Belt Tensioner Replacement .
    3. Fig 1: Timing Belt Rear Cover And Bolts
    GM2026845Courtesy of GENERAL MOTORS COMPANY
  3. Remove and DISCARD the 4 timing belt rear cover bolts (2).
    4. NOTE:

    Oil can escape. Use a cloth, rag or paper to take the oil drain away from all timing components.

  4. Remove the timing belt rear cover (1).
scientia non olet · About LEMON Manuals