LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2012 >> Cruze Eco, Automatic Trans >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 1 (Engine Mechanical - 1.8L (LUW)) >> Repair Instructions - On Vehicle >> Oil Pressure Relief Valve Replacement >> Removal Procedure

Removal Procedure

WARNING: This page is about a different variant/trim than selected.
  1. Remove the oil pan. Refer to Oil Pan Replacement .
    2. Fig 1: Oil Pressure Relief Valve Assembly
    GM2028017Courtesy of GENERAL MOTORS COMPANY
  2. Remove the oil pressure relief valve closure bolt (1).
  3. Remove the oil pressure relief valve assembly (2).
  4. Remove the piston (3) and the spring (4).
    5. WARNING:

    Bodily injury may occur if the cleaning solvent is inhaled or exposed to the skin.

    WARNING:

    To avoid eye injury, use approved safety lenses, goggles, or face shield when using buffing and cleaning equipment.

  5. Clean the parts.
  6. Inspect the parts.
  7. Clean the thread.
scientia non olet · About LEMON Manuals