LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2012 >> Cruze Eco, Automatic Trans >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 1 (Engine Mechanical - 1.8L (LUW)) >> Repair Instructions - On Vehicle >> Oil Level Indicator Tube Replacement >> Removal Procedure

Removal Procedure

WARNING: This page is about a different variant/trim than selected.
  1. Open the hood.
  2. Remove the oil dipstick.
    3. NOTE:

    If the engine oil level is at maximum, some oil may emerge when drawing out the oil dipstick guide tube.

  3. Place collecting basin underneath.
    4. Fig 1: Oil Level Indicator Tube And Bolt
    GM2026827Courtesy of GENERAL MOTORS COMPANY
  4. Remove the oil level indicator tube bolt (1).
  5. Remove the oil level indicator tube (2) and the oil level indicator seal.
scientia non olet · About LEMON Manuals