Engine Oil Heater Replacement
WARNING: This page is about a different variant/trim than selected.
Engine Oil Heater Replacement
| Callout | Component Name |
|---|---|
|
WARNING:
Preliminary Procedures Disconnect the battery negative cable. Refer to Battery Negative Cable Disconnection and Connection
.While engine is operating, the exhaust system will become extremely hot. To prevent burns avoid contacting a hot exhaust system. |
|
| 1 | Engine Oil Heater Bolt
CAUTION:
Refer to Fastener Caution . Tighten 40 N.m (30 lb ft) |
| 2 | Engine Oil Heater Procedure Disconnect the wiring harness plug. |