LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2012 >> Cruze Eco, Automatic Trans >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 1 (Engine Mechanical - 1.8L (LUW)) >> Repair Instructions - On Vehicle >> Drive Belt Replacement >> Removal Procedure

Removal Procedure

WARNING: This page is about a different variant/trim than selected.
  1. Open the hood.
  2. Raise the vehicle. Refer to Lifting and Jacking the Vehicle .
  3. Remove the right front wheelhouse liner. Refer to Front Wheelhouse Liner Replacement .
    4. Fig 1: Drive Belt Tensioner And Special Tool
    GM2189264Courtesy of GENERAL MOTORS COMPANY
  4. Release tension to the drive belt tensioner by rotating counterclockwise (1) and lock with EN 6349  pin (2).
    5. Fig 2: Drive Belt
    GM2191162Courtesy of GENERAL MOTORS COMPANY
  5. Remove the drive belt (1).
scientia non olet · About LEMON Manuals