LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2012 >> Cruze Eco, Automatic Trans >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 1 (Engine Mechanical - 1.8L (LUW)) >> Repair Instructions - On Vehicle >> Automatic Transmission Flex Plate Replacement >> Removal Procedure

Removal Procedure

WARNING: This page is about a different variant/trim than selected.
  1. Remove the automatic transmission. Refer to Transmission Replacement .
    2. Fig 1: Automatic Transmission Flex Plate And Holder
    GM2028106Courtesy of GENERAL MOTORS COMPANY
  2. Install the EN-652  holder (1) to hold the automatic transmission flex plate (2).
  3. Loosen the 6 automatic transmission flex plate bolts.
  4. Remove the EN-652  holder (1).
    5. Fig 2: Automatic Transmission Flex Plate And Bolts
    GM2028105Courtesy of GENERAL MOTORS COMPANY
  5. Remove the 6 automatic transmission flex plate bolts (2).
  6. Remove the automatic transmission flex plate (1).
scientia non olet · About LEMON Manuals