LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2012 >> Cruze Eco, Automatic Trans >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 1 (Engine Mechanical - 1.8L (LUW)) >> Repair Instructions - Off Vehicle >> Water Pump Pulley Installation

Water Pump Pulley Installation

WARNING: This page is about a different variant/trim than selected.
    Fig 1: Water Pump And Water Pump Pulley
    GM2026887Courtesy of GENERAL MOTORS COMPANY
    NOTE:

    Counterhold the crankshaft balancer. The belt has to be installed for this procedure.

  1. Install the water pump pulley (2) to the water pump (3).
  2. CAUTION:

    Refer to Fastener Caution .

  3. Install the 3 water pump pulley bolts (1) with locking compound and tighten to 20 N.m (15 lb ft).

    Refer to Adhesives, Fluids, Lubricants, and Sealers .