LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2012 >> Cruze Eco, Automatic Trans >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 1 (Engine Mechanical - 1.8L (LUW)) >> Repair Instructions - Off Vehicle >> Engine Oil Cooler Housing Removal

Engine Oil Cooler Housing Removal

WARNING: This page is about a different variant/trim than selected.
    Fig 1: Engine Oil Cooler Outlet Pipe And Bolts
    GM2026830Courtesy of GENERAL MOTORS COMPANY
  1. Remove the 2 engine oil cooler pipe bolts (1).
  2. Remove the oil cooler pipe (2).
    3. Fig 2: Engine Oil Cooler Housing, Bolts And Engine Oil Cooler Inlet Pipe
    GM2026867Courtesy of GENERAL MOTORS COMPANY
  3. Remove the 5 engine oil cooler housing bolts (2).
  4. Remove the engine oil cooler housing (1).
  5. Remove the engine oil cooler inlet pipe (3).
scientia non olet · About LEMON Manuals