LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2012 >> Cruze Eco, Automatic Trans >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 1 (Engine Mechanical - 1.8L (LUW)) >> Repair Instructions - Off Vehicle >> Drive Belt Tensioner Installation

Drive Belt Tensioner Installation

WARNING: This page is about a different variant/trim than selected.
  1. Clean the drive belt tensioner thread.
    2. Fig 1: Drive Belt Tensioner Bolt
    GM2495148Courtesy of GENERAL MOTORS COMPANY
  2. Install drive belt tensioner (2).
    3. CAUTION:

    Refer to Fastener Caution .

  3. Install drive belt tensioner bolt (1) and tighten to 55 N.m (41 lb ft).
scientia non olet · About LEMON Manuals