LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2012 >> Cruze Eco, Automatic Trans >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 1 (Engine Mechanical - 1.8L (LUW)) >> Repair Instructions - Off Vehicle >> Crankshaft and Bearing Removal

Crankshaft and Bearing Removal

WARNING: This page is about a different variant/trim than selected.
    Fig 1: Connecting Rod And Bearing Cap
    GM1948709Courtesy of GENERAL MOTORS COMPANY
  1. Identify all the connecting rod bearing caps (1).
    2. Fig 2: Connecting Rod Bearing Caps
    GM1937053Courtesy of GENERAL MOTORS COMPANY
  2. Remove the 4 bolts.
  3. Remove the connecting rod bearing caps 1 and 4 (1).
  4. Turn the crankshaft through 180°.
    5. Fig 3: Connecting Rod Bearing Caps
    GM1937048Courtesy of GENERAL MOTORS COMPANY
  5. Remove the 4 bolts.
  6. Remove the connecting rod bearing caps 2 and 3 (1).
  7. Identify the crankshaft bearing caps.
    8. Fig 4: Crankshaft Bearing Cap Bolts
    GM1937120Courtesy of GENERAL MOTORS COMPANY
  8. Remove the crankshaft bearing caps (1).
  9. Remove the 10 bolts.
  10. Remove the crankshaft (2).
  11. Remove the crankshaft bearing clips.
scientia non olet · About LEMON Manuals