Camshaft Position Actuator Solenoid Valve Installation

WARNING: This page is about a different variant/trim than selected.

Fig 1: Camshaft Position Actuator Solenoid Valves, Bolts And Seals

GM2028075

Courtesy of GENERAL MOTORS COMPANY

NOTE:

Lubricate the NEW camshaft position actuator solenoid valve seals with NEW engine oil. Refer to Adhesives, Fluids, Lubricants, and Sealers .

Install NEW camshaft position actuator solenoid valve seals (3).
Install the camshaft position actuator solenoid valves (2).

CAUTION:

Refer to Fastener Caution .

Install the camshaft position actuator solenoid valve bolts (1) and tighten to 6 N.m (53 lb in).