Installation Procedure

WARNING: This page is about a different car, the 2010 Pontiac G5 and 2010 Chevrolet Cobalt. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: View Of Wiper Arm In Service Position

Courtesy of GENERAL MOTORS CORP.

Install the hook of the wiper arm through the opening in the wiper blade.
Press the wiper blade pivot into the wiper arm hook until the pivot locks into the hook.
Position the wiper blade pivot in the inside radius of the wiper arm hook.
Move the wiper arm back to the parked position.
Operate the windshield wipers and inspect for proper operation.