Removal Procedure
WARNING: This page is about a different car, the 2010 Pontiac G5 and 2010 Chevrolet Cobalt. However, it is still accessible from the selected car via links, so may be relevant.
- Drain the washer solvent from the washer solvent container.
- Remove the front fender liner. Refer to Front Fender Liner Replacement .
- Disconnect the washer pump electrical connector.
- Disconnect the washer pump hose.
- Using a small flat-bladed tool, remove the washer pump from the washer solvent container.
- Using a small flat-bladed tool, remove the seal from the washer solvent container.
Fig 1: Identifying Washer Pump Hose, Washer Pump Electrical Connector, & Washer Solvent Level Sensor