LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2012 >> Cruze Eco, Automatic Trans >> Repair and Diagnosis >> External Pages >> Different car >> Section 99 (Wiper System & Washer System) >> Repair Instructions >> Air Inlet Grille Panel Replacement >> Removal Procedure

Removal Procedure

WARNING: This page is about a different car, the 2010 Pontiac G5 and 2010 Chevrolet Cobalt. However, it is still accessible from the selected car via links, so may be relevant.
    Fig 1: View Of Hood Rear Seal
    GM872488Courtesy of GENERAL MOTORS CORP.
  1. Pull the hood rear seal from the air inlet grille panel to remove it.
  2. Remove the wiper arms. Refer to Windshield Wiper Arm Replacement .
  3. Fig 2: View Of Cowl Vent Screen
    GM899985Courtesy of GENERAL MOTORS CORP.
  4. Remove the push pin fasteners in the air inlet grille panel.
  5. Disconnect the washer fluid hose.
  6. Remove the air inlet grille panel from the vehicle.
  7. Fig 3: View Of Washer Nozzle Tabs
    GM876379Courtesy of GENERAL MOTORS CORP.
  8. Remove the washer nozzles from the air inlet grille panel.