LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2012 >> Cruze Eco, Automatic Trans >> Repair and Diagnosis >> External Pages >> Different car >> Section 89 (Engine Mechanical - 2.0L) >> Repair Instructions - On Vehicle >> Turbocharger Oil Feed Pipe Replacement >> Removal Procedure

Removal Procedure

WARNING: This page is about a different car, the 2010 Chevrolet Cobalt. However, it is still accessible from the selected car via links, so may be relevant.
    Fig 1: Turbocharger Oil Feed Pipe Bolts And Pipe
    GM2003826Courtesy of GENERAL MOTORS CORP.
  1. Remove the catalytic converter. Refer to Catalytic Converter Replacement (LNF) .
  2. Remove the thermostat housing. Refer to Engine Coolant Thermostat Housing Replacement (LNF) .
  3. Remove the turbocharger oil feed pipe bolts (1) and pipe.
  4. Remove and discard the turbocharger oil feed pipe gaskets.
scientia non olet · About LEMON Manuals