LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2012 >> Cruze Eco, Automatic Trans >> Repair and Diagnosis >> External Pages >> Different car >> Section 89 (Engine Mechanical - 2.0L) >> Repair Instructions - On Vehicle >> Timing Chain Tensioner Replacement >> Removal Procedure

Removal Procedure

WARNING: This page is about a different car, the 2010 Chevrolet Cobalt. However, it is still accessible from the selected car via links, so may be relevant.
  1. Disconnect the negative battery cable. Refer to Battery Negative Cable Disconnection and Connection .
  2. Remove the camshaft cover. Refer to Camshaft Cover Replacement .
    3. Fig 1: Identifying Timing Chain Tensioner
    GM412158Courtesy of GENERAL MOTORS CORP.
  3. Remove the timing chain tensioner.
  4. Remove the seal from the tensioner.
scientia non olet · About LEMON Manuals