LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2012 >> Cruze Eco, Automatic Trans >> Repair and Diagnosis >> External Pages >> Different car >> Section 89 (Engine Mechanical - 2.0L) >> Repair Instructions - On Vehicle >> Engine Oil Cooler Replacement >> Removal Procedure

Removal Procedure

WARNING: This page is about a different car, the 2010 Chevrolet Cobalt. However, it is still accessible from the selected car via links, so may be relevant.
    Fig 1: Identifying Oil Cooler Hoses & Bolts
    GM2035289Courtesy of GENERAL MOTORS CORP.
  1. Drain the charged air cooling system. Refer to Cooling System Draining and Filling (Static Fill LNF) .
  2. Disconnect the oil cooler hoses (1).
  3. Remove the oil cooler bolts (2).
  4. Remove the oil cooler.
scientia non olet · About LEMON Manuals