LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2012 >> Cruze Eco, Automatic Trans >> Repair and Diagnosis >> External Pages >> Different car >> Section 89 (Engine Mechanical - 2.0L) >> Repair Instructions - On Vehicle >> Crankshaft Rear Oil Seal Replacement >> Removal Procedure

Removal Procedure

WARNING: This page is about a different car, the 2010 Chevrolet Cobalt. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove the transmission. Refer to Transmission Replacement .
    2. Fig 1: Identifying Flywheel & Retaining Bolts
    GM412117Courtesy of GENERAL MOTORS CORP.
  2. Remove the flywheel.
    3. Fig 2: View Of Crankshaft Rear Oil Seal
    GM406046Courtesy of GENERAL MOTORS CORP.
    NOTE: Do not damage the outside diameter of the crankshaft or chamber with any tool.
  3. Pry the crankshaft rear oil seal with a flat-bladed tool.
scientia non olet · About LEMON Manuals