Oil Pan Installation

WARNING: This page is about a different car, the 2010 Chevrolet Cobalt. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: Applying RTV Around Perimeter Of Oil Pan & Oil Suction Port Opening

Courtesy of GENERAL MOTORS CORP.

Ensure the oil pan and mounting surface on the lower crankcase are free of all oil and debris.
Apply a 3.5 mm bead of sealant around the perimeter of the oil pan and the oil suction port opening. Refer to Adhesives, Fluids, Lubricants, and Sealers .

Fig 2: Installing Oil Pan

Courtesy of GENERAL MOTORS CORP.

Install the oil pan.

Fig 3: Identifying Oil Pan Bolts Removal & Tightening Sequence

Courtesy of GENERAL MOTORS CORP.

CAUTION: Refer to Fastener Caution .

Install the oil pan bolts and tighten in sequence to 25 N.m (18 lb ft).