LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2012 >> Cruze Eco, Automatic Trans >> Repair and Diagnosis >> External Pages >> Different car >> Section 89 (Engine Mechanical - 2.0L) >> Repair Instructions - Off Vehicle >> Crankshaft Front Oil Seal Installation >> Tools Required

Tools Required

WARNING: This page is about a different car, the 2010 Chevrolet Cobalt. However, it is still accessible from the selected car via links, so may be relevant.

J 34115  Sprocket Bearing Installer. See Special Tools .

    Fig 1: Installing Crankshaft Front Oil Seal
    GM414081Courtesy of GENERAL MOTORS CORP.
  1. Install the seal into the front cover using the J 34115  . See Special Tools .
  2. Ensure that the engine front cover is properly supported when installing the seal.
scientia non olet · About LEMON Manuals