LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2012 >> Cruze Eco, Automatic Trans >> Repair and Diagnosis >> External Pages >> Different car >> Section 89 (Engine Mechanical - 2.0L) >> Repair Instructions - Off Vehicle >> Camshaft Cover Removal

Camshaft Cover Removal

WARNING: This page is about a different car, the 2010 Chevrolet Cobalt. However, it is still accessible from the selected car via links, so may be relevant.
    Fig 1: Bolt And Coil
    GM1825032Courtesy of GENERAL MOTORS CORP.
  1. Remove the bolt and coil.
    2. Fig 2: Camshaft Cover Assembly
    GM1825034Courtesy of GENERAL MOTORS CORP.
    IMPORTANT: The PCV hose should not be disconnected from the camshaft cover. The PCV hose and the camshaft cover cannot be serviced individually.
  2. Remove the camshaft cover assembly.
  3. Remove and discard the camshaft cover gasket, camshaft cover grommets, and camshaft cover bolts if they are serviced with the grommets.
    4. Fig 3: Camshaft Position Actuator Solenoid Valves
    GM1845622Courtesy of GENERAL MOTORS CORP.
  4. Remove the camshaft position actuator solenoid valve bolts.
  5. Remove the camshaft position actuator solenoid valves.
scientia non olet · About LEMON Manuals