LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2012 >> Cruze Eco, Automatic Trans >> Repair and Diagnosis >> External Pages >> Different car >> Section 87 (Lighting System) >> Diagnostic Information and Procedures >> Courtesy Lamps Malfunction >> Circuit/System Verification

Circuit/System Verification

WARNING: This page is about a different car, the 2010 Pontiac G5 and 2010 Chevrolet Cobalt. However, it is still accessible from the selected car via links, so may be relevant.
  1. Ignition ON, observe the scan tool Driver Door Ajar Sw. parameter while opening and closing the driver door. The reading should change between Door Ajar and Door Closed.
  2. Observe the scan tool Door Ajar Sw. parameter while opening and closing the front passenger door, left rear passenger door and right rear passenger door. The reading should change between Door Ajar and Door Closed.
  3. Command the Interior Lamps ON and OFF with a scan tool. The courtesy lamps should turn ON and OFF when changing between the commanded states.
    • If the courtesy lamps do not turn ON and OFF when commanded, Courtesy Lamp Malfunction.
  4. Command the Inadvertent Power control ON and OFF with a scan tool. The courtesy lamps should turn ON and OFF when changing between the commanded states.
  5. Turn the Rear Compartment Courtesy Lamp ON and OFF by opening and closing the trunk lid. The rear compartment courtesy lamp should turn ON and OFF when changing between the selected states.
scientia non olet · About LEMON Manuals