Circuit/System Description

WARNING: This page is about a different car, the 2010 Pontiac G5 and 2010 Chevrolet Cobalt. However, it is still accessible from the selected car via links, so may be relevant.

The body control module (BCM) applies battery voltage to the courtesy lamps through the courtesy lamps control circuit. When any door is opened, the door ajar switch contacts close and the BCM receives a door-open input. If the BCM receives a door lock or unlock input or a rear hatch open input, the BCM will activate the courtesy lamps control circuit, providing battery voltage to all of the dome lamps and reading lamps. The dome lamp switch consists of 3 positions, ON, DOOR, and OFF. When the dome lamp switch is placed in the DOOR position, the dome lamps will illuminate when a door is opened. The dome lamps are provided with battery voltage via the courtesy lamps control circuit and ground through the courtesy lamps low control circuit. In the event that any of these lamps were to remain illuminated for more than 20 minutes with the ignition switch in the OFF position, the BCM will deactivate the courtesy lamp high control circuit to prevent a total battery discharge condition.