LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2012 >> Cruze Eco, Automatic Trans >> Repair and Diagnosis >> External Pages >> Different car >> Section 84 (Bolted Exterior Body Panels And Closures) >> Repair Instructions >> Seal Replacement - Plenum to Hood >> Removal Procedure

Removal Procedure

WARNING: This page is about a different car, the 2010 Pontiac G5 and 2010 Chevrolet Cobalt. However, it is still accessible from the selected car via links, so may be relevant.
  1. Open the hood.
  2. Fig 1: View Of Hood Rear Seal
    GM872488Courtesy of GENERAL MOTORS CORP.
  3. Pull the hood rear seal from the air inlet screen.