LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2012 >> Cruze Eco, Automatic Trans >> Repair and Diagnosis >> External Pages >> Different car >> Section 84 (Bolted Exterior Body Panels And Closures) >> Repair Instructions >> Hood Rear Outer Seal Replacement >> Installation Procedure

Installation Procedure

WARNING: This page is about a different car, the 2010 Pontiac G5 and 2010 Chevrolet Cobalt. However, it is still accessible from the selected car via links, so may be relevant.
    Fig 1: View Of Rear Side Hood Seal
    GM872463Courtesy of GENERAL MOTORS CORP.
  1. Remove the protective backing paper from the adhesive on the rear side hood seal.
  2. With the rear side hood seal butted to the plenum to hood seal, press the side hood seal until the adhesive is fully adhered.
  3. Close the hood.
scientia non olet · About LEMON Manuals