LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2012 >> Cruze Eco, Automatic Trans >> Repair and Diagnosis >> External Pages >> Different car >> Section 84 (Bolted Exterior Body Panels And Closures) >> Repair Instructions >> Hood Primary and Secondary Latch Replacement >> Removal Procedure

Removal Procedure

WARNING: This page is about a different car, the 2010 Pontiac G5 and 2010 Chevrolet Cobalt. However, it is still accessible from the selected car via links, so may be relevant.
  1. Raise the hood.
  2. Mark the hood latch location to the support bracket with a grease pencil.
    3. Fig 1: View Of Hood Latch
    GM863868Courtesy of GENERAL MOTORS CORP.
  3. Remove the hood latch bolts.
    4. Fig 2: View Of Hood Release Cable
    GM863872Courtesy of GENERAL MOTORS CORP.
  4. Disconnect the release cable from the hood latch by squeezing the cable retainer.
  5. Remove the hood latch from the vehicle.
scientia non olet · About LEMON Manuals