Hood Adjustment

WARNING: This page is about a different car, the 2010 Pontiac G5 and 2010 Chevrolet Cobalt. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: Adjusting Hood Fore & Aft, & Cross-Vehicle

Courtesy of GENERAL MOTORS CORP.

Loosen the hinge to body bolts to adjust the hood fore and aft, and cross-vehicle. Position the hood as needed.
Loosen the hinge to hood bolts to adjust the hood up and down at the rear of the hood. Position as needed.

Fig 2: Adjusting Hood & Hood Latch Bumpers

Courtesy of GENERAL MOTORS CORP.

Adjust the hood latch and hood bumpers to adjust the hood up and down at the front of the hood.

CAUTION: Refer to Fastener Caution .

Tighten the hinge and latch bolts.
- Tighten the hinge-to-hood bolts to 10 N.m (89 lb in) .
- Tighten the hinge-to-body bolts to 10 N.m (89 lb in) .
- Tighten the hood latch nuts to 10 N.m (89 lb in) .