Front Fender Replacement

WARNING: This page is about a different car, the 2010 Pontiac G5 and 2010 Chevrolet Cobalt. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: View Of Front Fender & Fasteners

Courtesy of GENERAL MOTORS CORP.

Callout	Component Name
Preliminary Procedures Lift and support the vehicle. Refer to Lifting and Jacking the Vehicle . Remove the tire and wheel assembly. Refer to Tire and Wheel Removal and Installation . Remove the front fender liner. Refer to Front Fender Liner Replacement .
1	Front Fender Bolt (Qty: 7) CAUTION: Refer to Fastener Caution . Tip: Apply tape along the door and the fascia edge to protect the paint. Tighten: 10 N.m (89 lb in)
2	Front Fender

Callout

Component Name

Preliminary Procedures

Lift and support the vehicle. Refer to Lifting and Jacking the Vehicle .
Remove the tire and wheel assembly. Refer to Tire and Wheel Removal and Installation .
Remove the front fender liner. Refer to Front Fender Liner Replacement .

Front Fender Bolt (Qty: 7)

CAUTION: Refer to Fastener Caution .

Tip: Apply tape along the door and the fascia edge to protect the paint.

Tighten: 10 N.m (89 lb in)

Front Fender