Circuit/System Verification
WARNING: This page is about a different car, the 2010 Pontiac G5 and 2010 Chevrolet Cobalt. However, it is still accessible from the selected car via links, so may be relevant.
- Ignition ON, observe the scan tool Door Lock Switch parameter while using the appropriate door lock switch. The parameter should change from Idle to Lock and Unlock.
- If the parameter does not change between the commanded states, refer to Door Lock Switch Malfunction .
- Command the driver door and passenger door latches to LOCK and UNLOCK with the scan tool, the doors should perform the LOCK and UNLOCK functions.
- If one or more doors do not LOCK or UNLOCK, refer to Door Lock Switch Malfunction .