Turn Signal Multifunction Switch Replacement
WARNING: This page is about a different car, the 2010 Pontiac G5 and 2010 Chevrolet Cobalt. However, it is still accessible from the selected car via links, so may be relevant.
Courtesy of GENERAL MOTORS CORP.
| Callout |
Component Name |
|
Preliminary Procedure
- Remove the left side instrument panel trim panel. refer to Instrument Panel Trim Panel Replacement - Left Side
.
- Remove the steering column trim covers. Refer to Steering Column Trim Cover Replacement .
|
| 1 |
Turn Signal Multifunction Switch Procedure
- Disconnect any electrical connectors as needed.
- Release the plastic retaining tabs to remove the turn signal multifunction switch.
|