LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2012 >> Cruze Eco, Automatic Trans >> Repair and Diagnosis >> External Pages >> Different car >> Section 79 (Heating, Ventilation, And Air Conditioning) >> Repair Instructions >> Flushing >> Forward Flushing Setup

Forward Flushing Setup

WARNING: This page is about a different car, the 2010 Pontiac G5 and 2010 Chevrolet Cobalt. However, it is still accessible from the selected car via links, so may be relevant.
    NOTE: Forward flow refrigerant flushing is recommended for contaminated refrigerant or PAG oil.
    Fig 1: Identifying J 45268-2 (3), J 45268-7 (1), J 45268-8 (4), & J 45268-9 (2)
    GM1162447Courtesy of GENERAL MOTORS CORP.
    NOTE: Inspect and lubricate the sealing washers J 45268  . See Special Tools . Refer to Air Conditioning System Seal Replacement .
  1. Install both J 45268-9 (2) onto the J 45268-10 (3).
  2. Install the J 45268-7 (4) onto the suction side of the J 45268-10 (3).
  3. Install the J 45268-8 (1) onto the discharge side of the J 45268-10 (3).
scientia non olet · About LEMON Manuals