Removal Procedure
WARNING: This page is about a different car, the 2010 Pontiac G5 and 2010 Chevrolet Cobalt. However, it is still accessible from the selected car via links, so may be relevant.
- Remove the charge air cooler inlet pipe. Refer to Charge Air Cooler Inlet Pipe Replacement .
- Recover the refrigerant. Refer to Refrigerant Recovery and Recharging .
- Remove the condenser tube and evaporator hose from the thermal expansion valve (TXV).
- Remove and discard the seal washers.
- Remove the TXV bolts.
- Remove the TXV.
- Remove and discard the seal washers.