LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2012 >> Cruze Eco, Automatic Trans >> Repair and Diagnosis >> External Pages >> Different car >> Section 77 (Instrument Panel System Displays & Gauges) >> Diagnostic Information and Procedures >> Charge Indicator Malfunction >> Circuit/System Verification

Circuit/System Verification

WARNING: This page is about a different car, the 2010 Pontiac G5 and 2010 Chevrolet Cobalt. However, it is still accessible from the selected car via links, so may be relevant.
  1. Ignition ON, engine running, verify the scan tool Battery Voltage parameter is between 12.5 and 15.5 volts.
  2. Ignition ON, perform the displays test with the scan tool. The charge indicator should turn ON and OFF when changing between the commanded states.
    • If the indicator does not turn ON and OFF between commanded states, replace the IPC.
scientia non olet · About LEMON Manuals