Instrument Panel Cluster Trim Plate Bezel Replacement

WARNING: This page is about a different car, the 2010 Pontiac G5 and 2010 Chevrolet Cobalt. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: View Of Instrument Panel Cluster Trim Plate Bezel

Courtesy of GENERAL MOTORS CORP.

Callout	Component Name
Preliminary Procedures Remove the instrument panel (I/P) trim plates. Refer to the following procedures: Instrument Panel Center Trim Panel Replacement Instrument Panel Trim Panel Replacement - Left Side Tilt the steering wheel down.
1	Instrument Panel Cluster Bezel Screw (Qty: 4) CAUTION: Refer to Fastener Caution . Tighten: 2.2 N.m (19 lb in)
2	Panel Cluster Bezel Assembly

Callout

Component Name

Preliminary Procedures

Remove the instrument panel (I/P) trim plates. Refer to the following procedures:
- Instrument Panel Center Trim Panel Replacement
- Instrument Panel Trim Panel Replacement - Left Side
Tilt the steering wheel down.

Instrument Panel Cluster Bezel Screw (Qty: 4)

CAUTION: Refer to Fastener Caution .

Tighten: 2.2 N.m (19 lb in)

Panel Cluster Bezel Assembly