Front Seat Replacement - Bucket

WARNING: This page is about a different car, the 2010 Pontiac G5 and 2010 Chevrolet Cobalt. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: Identifying Front Seat & Mounting Bolts

Courtesy of GENERAL MOTORS CORP.

Callout	Component Name
1	Front Seat Assembly Bolt CAUTION: Refer to Fastener Caution . Procedure Remove the bolt. Disconnect the electrical connectors. Tilt the seat forward to release the front of the seat tracks. Tighten: 30 N.m (22 lb ft)