LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2012 >> Cruze Eco, Automatic Trans >> Repair and Diagnosis >> External Pages >> Different car >> Section 72 (Tires And Wheels) >> Repair Instructions >> Tire Repair >> Clean the Injury Channel

Clean the Injury Channel

WARNING: This page is about a different car, the 2010 Pontiac G5 and 2010 Chevrolet Cobalt. However, it is still accessible from the selected car via links, so may be relevant.
    Fig 1: Reaming Puncture Channel
    GM1407455Courtesy of GENERAL MOTORS CORP.
  1. Use a proper hand reamer, carbide cutter or drill bit to ream the puncture channel from the inside of the tire in order to clean the injury.
  2. Remove steel wires protruding above the liner surface to prevent damage to the repair unit.
  3. Consult your repair material supplier for recommended reaming tool(s).
scientia non olet · About LEMON Manuals