Rear Seat Belt Buckles

WARNING: This page is about a different car, the 2011 Honda Insight and 2010 Honda Insight. However, it is still accessible from the selected car via links, so may be relevant.

NOTE:

Put on gloves to protect your hands.
Take care not to tear or damage the seat covers.

Remove the seat cushion (see REAR SEAT REMOVAL/INSTALLATION ).
Remove the bolts, then remove the rear seat belt buckles (A).
Left side

Fig 1: Rear Seat Belt Buckles And Bolts With Torque Specifications (Left Side)
Courtesy of AMERICAN HONDA MOTOR CO., INC.

Right side

Fig 2: Rear Seat Belt Buckles And Bolts With Torque Specifications (Right Side)
Courtesy of AMERICAN HONDA MOTOR CO., INC.
Install the anchor and buckle in the reverse order of removal, and note these items:
- Tighten the bolts by hand first, then tighten to specified torque.
- Assemble the washer on the anchor bolt as shown.
Anchor bolt installation

Fig 3: Identifying Washer On Anchor Bolt
Courtesy of AMERICAN HONDA MOTOR CO., INC.