Crankshaft Pulley Removal and Installation: Removal
WARNING: This page is about a different car, the 2011 Honda Insight and 2010 Honda Insight. However, it is still accessible from the selected car via links, so may be relevant.
- Remove the front wheels.
- Remove the right front wheel.
- Remove the splash shields (see step 22 ENGINE REMOVAL ).
- Remove the drive belt (see DRIVE BELT INSPECTION ).
- Hold the pulley with the holder handle (A) and the pulley holder attachment (B).
- Remove the bolt with a 19 mm socket wrench (C) and a breaker bar, then remove the crankshaft pulley.