LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2012 >> Cruze Eco, Automatic Trans >> Repair and Diagnosis >> External Pages >> Different car >> Section 152 (Wiring Systems And Power Management - Inline Harness Connector End Views) >> Inline Harness Connector End Views >> X102 Engine Harness to the Crankshaft Position Jumper

X102 Engine Harness to the Crankshaft Position Jumper

WARNING: This page is about a different car, the 2010 Pontiac G5 and 2010 Chevrolet Cobalt. However, it is still accessible from the selected car via links, so may be relevant.
X102 Engine Harness to the Crankshaft Position Jumper

GM646415Courtesy of GENERAL MOTORS CORP.
GM632353Courtesy of GENERAL MOTORS CORP.
Connector Part Information 
  • OEM: 15326808
  • Service: See Catalog
  • Description: 3-Way F GT 150 Series Sealed (BK)
Connector Part Information 
  • OEM: 15326813
  • OEM: 15326813
  • Description: 3-Way M GT 150 Series Sealed (BK)
Terminal Part Information 
  • Terminal/Tray: 12191819/8
  • Core/Insulation Crimp: E/1
  • Release Tool/Test Probe: 15315247/J-35616-2A (GY)
Terminal Part Information 
  • Terminal/Tray: 15326269/19
  • Core/Insulation Crimp: E/4
  • Release Tool/Test Probe: 15315247/J-35616-3 (GY)
X102 Engine Harness to the Crankshaft Position Jumper

Pin Wire Circuit Function Pin Wire Circuit Function
A 0.5 L-GN 2867 Crankshaft Position Sensor Supply Voltage A 0.5 L-GN 2867 Crankshaft Position Sensor Supply Voltage
B 0.5 PU 574 Low Reference B 0.5 PU 574 Low Reference
C 0.5 YE 573 CKP Sensor 1 Signal C 0.5 YE 573 CKP Sensor 1 Signal